OEM ODM 51.2V 280Ah 16kwh Grade A LiFePO4 Lithium Battery pack active balancer
CATL 280ah lithium battery parameter
| Normal capacity | 280ah |
| Normal voltage | 3.2V |
| Standard Charging voltage | 3.65V |
| Internal resistance | ≤0.3Ω |
| Standard charge method | 0.5C constant current charge to 3.65V for cell |
| Standard discharge current | 0.5C |
| Max discharge current(continues) | 1.0C |
| Weight | 5.4kg |
| Cell size | 72*174*200mm |
|
|
| Normal capacity | 280ah |
| Normal voltage | 3.2V |
| Standard Charging voltage | 3.65V |
| Internal resistance | 0.17±0.05mΩ |
| Standard charge method | 0.5C constant current charge to 3.65V for cell |
| Standard discharge current | 0.5C |
| Max discharge current(continues) | 1.0C |
| Weight | 5.4kg |
| Cell size | 72*174*208mm |
| Cycle life | ≥5200 Cycles |
| Typical capacity |
280 Ah | Refer to 2.2&2.3 standard charge and discharge procedure |
| Typical Energy | 896 Wh | Refer to 2.2&2.3 standard charge and discharge procedure |
| Operating voltage |
2.5~3.65V 2.0~3.65V | T>0°C Cell temperature T>0°C T≤0°C Cell temperature T≤0°C |
| Impedance (1KHz) | 0.17±0.05m Ω | Fresh cell (40%SOC) |
| Shipping capacity | 112±1 Ah | 40% SOC |
| Residual capacity loss |
≤3.0%/Per month | Fresh cell after 3month, 40%SOC, 25±2°C storage |
| Operating temperature (charging) |
0~60°C | Reference to paragraph 2.2 |
| Operating temperature (discharge) |
-20~60°C | Reference to paragraph 2.3 |
| Cell Weight | 5.34±0.30Kg | N.A. |
| Storage Temp. |
-30~60°C | Storage ambient humidity < 85% ROH, no condensation |
| Typical dimension (W*H*T) |
(Width):173.9±0.8mm (Height):207.2±0.8mm (Thickness):71.7±0.8 mm | Thickness with compression force (300±20 Kgf), Height with Terminal, BOL(Reference to item 8) |
| SOC Rest SOC | ≥5% | SOC interval without load or charging |
| Altitude |
≤2000m |
N.A. |
|
Cycle performance |
≥6000Cycles |
25±2°C, cycle test b y the standard charge and discharge method under 300±20Kgf preload |
|
Cycle fading |
≤5% |
25±2°C, cycle test b y the standard charge and discharge method under 300±20Kgf preload for 180 cycles |
|
Storage fading |
≤5% |
25±2°C , standard charging to 100% SOC storage under 300±20Kgf preload for six month |
As is known to all,CATL deals with EV manufacturers or enormous ESS project only.
In the gold time of Lithium battery when CATL factory had not enough production capacity for EV demand,it's impossible to get Grade A+ catl battery.The one in market was that removed from EV,refurnished,used battyer,in which the best one was unqualified EV battery(Grade A).
Then you see 280ah,300ah,302ah,310ah,320ah CATL cells,it hardly distinguish what capacity battery it is due to same appearance and scratched QR code.
Some catl cells with small QR code that is not scratched.However it is not qualified HSEV(high speed electrical vehicle) battery.
This is EV grade CATL 280ah battery,with QR code(not scratched and changed),factory data supplied for inspection.
|
|
OEM ODM 51.2V 280Ah 16kwh Grade A LiFePO4 Lithium Battery pack active balancer Images
|
